Tubing Inspection Services
Heat exchanger tubing inspection using IRIS, ECT, RFT, and NFT — matched to tubing material and inspection objective.
What we deliver
AIT provides full-coverage tubing inspection for heat exchangers, condensers, and similar tube bundle equipment. Method selection is matched to tubing material, defect mechanism, and the data the integrity team needs.
Inspections detect wall loss, pitting, cracking, and tube support degradation. Results are reported with clear severity grading and tube maps that support repair and re-tube planning.
Methods
Fastest electromagnetic technique for non-ferrous tubing — evaluates ID and OD in one pass and distinguishes ID/OD-originating defects.
Eddy Current Array with 360° coil coverage for circumferential cracking and defect morphology — a diagnostic complement to bobbin ET.
Remote Field Testing — fastest, most cost-effective method for ferrous tubing, evaluating ID and OD in a single pass.
Near Field Testing for aluminum-finned ferrous tubing such as fin-fans and air coolers.
Internal Rotary Inspection System — quantitative remaining wall thickness to ±0.003", used to confirm ET/RFT/NFT findings.
Benefits
- Detection of wall loss, pitting, and cracking
- Identification of tube support degradation
- Method matched to tube material and defect mechanism
- Clear tube maps and severity grading for repair planning
Ready to scope your next inspection?
Tell us about your facility, scope, and schedule. An AIT inspection specialist will follow up to discuss methods, mobilization, and reporting.